© Copyright 2015 — All Rights Reserved
Shunyata Research
p4
CCI™ NOISE REDUCTION
Traditional power conditioners are designed to block noise coming in from outside the home but do not
address the noise that is generated by the electronic component’s themselves. In fact, most conditioners reflect
noise back into other components connected to the power conditioner. CCI™ (Component-to-Component
Interference) is one of the most significant but often overlooked aspects to power system performance.
The Shunyata Research designed CCI™ filter consists of a proprietary multi-stage filter that reduces RFI and
power supply generated interference.
NIC™ NOISE REDUCTION
NIC™ (Noise Isolation Chamber) is a patented technology that reduces high frequency power line noise. NICs™
use a non-reactive ferroelectric substance that actually absorbs high frequency noise. This allows HYDRA power
distributors to reduce noise without any of the negatives associated with conventional power conditioner
designs.
~ Patent US 8,658,892 ~
CopperCONN™ OUTLETS
All commercial grade connectors and virtually all audiophile grade connectors are made from brass or bronze
base metals. Some audiophile grade connectors may get a plating of nickel, silver, gold or rhodium that is
only a few millionths of an inch thick. The Shunyata Research CopperCONN™ is constructed using solid, high
purity, oxygen free copper as the base metal with a flash coating to protect the copper from oxidation.
The CopperCONN™ outlets and connectors are designed to provide superior grip strength and contact integrity.
This contributes to a measurable improvement in DTCD™ (Dynamic Transient Current Delivery) performance
and a correspondingly obvious difference in audible performance.
ZPP-DS Distribution Buss
The ZPP-DS significantly reduces the daisy-chained wires, terminal strips and terminal connectors found
within common power conditioners. The power outlets, electrical terminals and main electrical buss are all
unified into a single OFC copper buss that dramatically improves DTCD™.
CGS - CHASSIS GROUNDING SYSTEM
The TRITON v2 includes the exclusive Chassis Grounding System (CGS). This provides a central grounding
point for all electronic components in the system. The CGS normalizes voltage differentials between
component chassis’ which may reduce performance robbing ground loops. It also lowers chassis ground
noise using Shunyata Research’s patented NIC™ technology.
VTX™ CONDUCTORS
Shunyata Research’s exclusive VTX™ conductors are virtual tubes. The core of the conductor is completely
hollow, electrically, so that all of the current travels through the circumference of the conductor eliminating
skin effects and random eddy currents through the conductor. The VTX™ conductors are produced with
CDA-101 copper which is the highest purity copper available.
HYDRAULIC ELECTROMAGNETIC BREAKER
Common power conditioners use fuses or thermal breakers for over current protection. The problem is that
these devices cause voltage drops, increased contact impedance, thermal noise, excessive heat generation
and current limiting effects when heavily loaded.
The TRITON v2 uses a more advanced solution called a hydraulic electromagnetic breaker that can operate
right up the to the maximum current level without the limitations of fuses or thermal breakers.
ArNi CRYOGENIC TREATMENT
Shunyata Research operates its own cryogenic treatment plant. We have developed a proprietary ArNi Cryo
Treatment procedure that is more advanced than the conventional nitrogen based procedure. All the critical
connectors, conductors and contacts used in our power cables, signal cables and power distributors are
treated. This procedure noticeably enhances the performance of the treated parts.
USER GUIDE
HYDRA TRITON v2
Содержание HYDRA TRITON v2
Страница 1: ...USER GUIDE Visit us online shunyata com ...
