Shenzhen Shumatt Technology Co., Ltd.
1
Carter 320D Common Rail Injector
stroke measurement tool
------CRT070
COPYRIGHT NOTICE
Shenzhen shumatt Technology Co., Ltd .and its partner
companies issued jointly issued including but not limited to
product or copyrighted content and services, etc. all
intellectual property rights, protected by law. Without our
written permission, any units and individuals shall not in
any way or reason to these products, services, information,
and any part of the material will be used, reproduced,
modified, copied, transmitted, or bundled with other
products use, sale, where violations the copyright and
other intellectual property rights, the company will pursue
its legal responsibility according to law.
CONTACT
Shenzhen: shumatt Technology Co., Ltd.
Add: 4th floor Noble Plaza NO269 Qian Jin road Bao An
District Shenzhen China
TEL: +86-755-23215133
Web: www.shumatt.net
Email:[email protected]
Cell phone: +86-13410541523
Technical support:[email protected]
INTRODUCTION
Carter 320D Common Rail Injector stroke measurement
tool is used for the maintenance of the production of 320D
Caterpillar common rail injector, innovative product design
and easy to use, can quickly break down the injector,
replace the valve assembly, adjusting the fuel solenoid
valve stroke. Common Rail Injector various parts of the
trip in response to the solenoid valves play a vital role,
once the trip is not standard, or outside the valid tolerance
range will cause the injector solenoid valve cannot reach
the responsed accuracy ,premature wear
of the valve
assembly, loading car will cause detonation phenomenon,
the use of this tool have the desired effect.
1.1 Product Parts
①
②
③
④
⑤
⑥
⑦
⑧
NO.
Name
Qty.
Note
①
Micrometer
1
Range 0-14mm
②
Oil trap
1
With ring seal
③
Injector
removal tools
1
Removing the valve
assembly
④
Stroke
measurer
1
The remaining gap
measure total stroke
armature disk
⑤
Hexagon
screwdriver
1
3.5mm
⑥
wrench
1
Length:11mm
⑦
Return spring
2
Armature disk for return
⑧
Seals
2
Oil trap seal
