10
®
FCD-0249 REV 02
Xtract-All
®
Nail (MSK1017) Winquist III Universal IM Nail Extraction System
Extract Implant
Extract implant with repeated strikes of the Mallet (MMM5) on Extraction C-frame strike plate. (Fig. M) If implant resists removal
after several strikes, use the Bone Chisel (MIWC) to loosen bone around implant before continuing.
5
If extractor tip breaks, (Fig. N) use Socket Wrench
(WIN18) to remove broken tip from IM nail.
Replace with a new tip and make another attempt.
A Note on Breakage
4
Build Extractor Assembly
1. Connect T-handle (MIWD) securely to selected
extractor. Screw extractor into IM nail. (Fig. I)
2. Once extractor is securely attached to IM nail, remove
the t-handle, applying counter-torque with the 1/2”
Wrench (MIWW) (Fig. J).
3. Connect Extraction C-frame (MIWE) to extractor using
a Hex Nut (MIWN). (Fig. K) Tighten nut fully with the
11/16” Wrench (MIWWA), applying counter-torque with
the 1/2” Wrench (MIWW).
Figure M
Figure N
Figure L
Implant Removal Tip Compatibility Matrix
The table to the right shows compatibility between a wide range of proprietary implant systems and
corresponding Xtract-All
®
Spine removal tips. This information is updated frequently, as our engineering team
continually adds to our range of available tips to cover the continually expanding spinal implant market.
-RAY
Search Engine
-RAY
Search Engine
For the most up-to-date information on supported
systems, contact customer service or your local rep
for access to our X-Ray Search Engine™ Implant
Compatibility Database.
Surgical Technique Continued
Figure I
Figure K
Figure J
Note:
If extractor is not long enough to attach to C-frame, use 6” Extension (WIN24 or MIWA22). (Fig. L)
