Responsibility Excellence Innovation
Interface
Main Interface:
Error informations display table
：
Setting interface
：
Page-4/8
First line : Display DMX address is “1”.
Second line : Display the present inner core temperature and the temperature progress bar;
displays remianing time is 7 minutes and 24 seconds.
Press “MENU” to enter the Setting interface, press the “MENU” button to enter different
options until you return to the main interface.
Options
Set DMX
Address
Wireless
Control
Manual
Fountain
Auto Clear
Delay
Range
1-512
ON/OFF
ON/OFF
0.1-0.9s
Instructions
Set the DMX address. machine become a wireless host and
can send out DMX signal when it’s address is “1++”.
Wireless function switch. you can match codeWhen shows “ON”
Manual fountain switch , for testing purposes only.
Automatic clear material settings.
Error Informations
Introductions
E0 System IC
System error.
E2 Temp. Sensor
Temperature sensor was damaged.
E3 P Temp. Over
Chassis temperature too high lead to shut down.
E4 Time Remain
Insufficient granules or remaining time, please swiping time card.
E5 K Temp. Over
Inner core temperature too high lead to shut down
E6 Heat Fail
Heating failed.
E7 Tip Over
Dumping alarm when machine is tilted at less than 45 degrees.
machine stop working when tilt alarm starts.
