Showven SPARKULAR JET, Руководство пользователя, Страница: 5 / 9

4. Advanced Menu:
Press “MENU” switch through setup menu.
*Please don't change default value without engineer's suggestion from SHOWVEN
5. DMX channel – 2 channel mode:
First channel Function
0-111 no function
112-255
Firing. To avoid false triggering, the trigger
time should maintain above 0.2s
Second channel Function
60-80
Clear material, the valve will open when
clear matrial, and clear the consumable
remains in the pipeline. Please DO
remember to clear material after each show
20-40
Emergency stop, when firing was triggered,
operator can stop the firing during this jet
delay period. And machine will prompt E0
error
0-10 Pre-heat OFF (disabled when auto-heat ON)
240-255 Pre-heat ON (disabled when auto-heat ON)
Options Range Explanation
Set Temperature 580-620 Set inner core temp
Auto Heat On/Off Auto heat ON/OFF when switch on machine
Jet Delay 0.5-2.0s
Firing delay set, time delay between press
firing on DMX/controller (firing trigger) and
actual sparks out from the nozzle
Mode Selection
Factory Mode/ User
Mode
Factory mode is for engineer only. When in
Factory mode machine can’t controlled by
DMX console/host controller
Standby Switch On/Off
Standby function. When ON, the machine
can firing only when heating up was
finished
Ext. Ignite On/Off
When use fireworks firing system to firing
the machine. Customized design for
fireworks customer
Feeding Test On/Off
Test the feeding structure and feeding
motor
Fan Test On/Off Test the blowing fan
Feeding1 Time 0.1-0.3s
Feeding time of the HC8200 from the
hopper
Feeding2 Time 0.5-3.0
Working time of shaft motor, Feeding2 time
should shorter than Jet Delay time