Radio frequency identification area
：
Main interface
：
Error informations display table
：
Setting interface
：
Interface
》
Composite Ti with RFID card, swiping cards used to identify parameters
and types of granules.
》
Please note that granules RFID card can increase the single machine
specific working time. The card is disposable,one card can only use one time.
First line
：
Display DMX address is “1”.
Second line: Display the present inner core temperature and the temperature progress bar; displays
remianing time is 7 minutes and 24 seconds.
Press “MENU” to enter the Setting interface, press the “MENU” button to enter different options until
you return to the main interface.
Options
Range
Explanation
Set DMX Address
Wireless Control
Manual Fountain
1-512
ON/OFF
ON/OFF
Set the DMX address,machine become a wireless host and can
send out DMX signal when its address is “1++”.
Wireless function switch,you can match code when shows “ON”
Manual fountain switch , for testing purpose only.
Error Informations
Explanation
E0 System IC
E2 Temp. Sensor
E3 P Temp. Over
E4 Time Remain
E5 K Temp. Over
E6 Heat Fail
System error.
Temperature sensor was damaged.
Chassis temperature is too high to shut down.
Insufficient granules or remaining time, please swiping time card.
Inner core temperature is too high to shut down
Heating failed.
Advanced menu
：
Press “MENU” 3 seconds to enter the advanced setup interface, press MENU key to enter different
options, press MENU till 3 seconds to return to the main interface.
Options
Explanation
Range
Set Temperature
Auto Heat
Density
Mode Selection
Default Parameter
500-610
ON/OFF
70-100
Factory Mode/User Mode
Setup inner Core temperature.
Auto preheat function switch after turning on machine.
Adjust the sparks density.
Factory Mode is factory debugging mode,
User Mode is using mode.
Press “ENTER” to restore all parameters to the
factory settings.
3
