background image

1

Creeper AQ Low Fog Generator

USER MANUAL

★ 

Please read this manual carefully before operating this product.

★ 

Warranty card attached in the manual, please keep it well.

Safety Considerations

Unauthorized repair are prohibited, it may cause serious incident.

Make sure power supply in consistent with the rated voltage of the equipment, and the socket must well grounded.  

    Unplug and turn off the machine when not use.

CREEPER AQ series machine can be used both indoor and outdoor, with better effect for indoor use. Please try to  

    keep the machine dry.

Not use the machine in high temperature. 

Installed in well ventilated area, ensure at least 50cm space around the machine, cover of the nozzle is forbidden.

For adult use only, keep it away from children, fire, inflammable and explosive articles.

If the machine fails to work, please stop operation and unplug the machine. Check fog fluid bottle, water tank, fuse,  

   power connection etc. carefully, if can’t solve the problem, please contact SHOWVEN or your local SHOWVEN           

   partner for advise. 

Suggest use SHOWVEN original FX-M fog fluid, other fluid may lead to clog or malfunction. 

In case of eye contact of fog fluid, please wash it with clean water. If fluid is swallowed immediately look for medical  

    advice.

Please do NOT adding any other material such as grease, pigment, gas etc to the fluid bottle or water tank. 

The device shall not be altered and applied to other use purpose.

Foreword

Thanks for choosing SHOWVEN CREEPER AQ series low fog generator. Please read following manual carefully and 

completely before operating this product. Operate according to instructions is very important for safety, and can 

elongate the service life of the machine.

Содержание Creeper AQ













Отзывы: