27
TR-512 Install
Product code: 50826
03)
Press (or press and hold down, for quick search) the UP/DOWN buttons to select the desired
character.
04)
Press the ENTER button to confirm your choice.
05)
Repeat steps 1–4 to edit the remaining characters.
06)
Press the UP/DOWN buttons to select CANCEL (to cancel changes) or ENTER (to save the new name).
07)
Press the ENTER button to confirm your choice.
Show
In this submenu you can assign your recorded programs to the desired triggers.
01)
Press the UP/DOWN buttons to select the desired program from the list.
02)
Press the ENTER button to confirm your choice.
Mode
In this submenu you can set the trigger mode.
01)
Press the UP/DOWN buttons to select one of the 4 modes:
●
NO_TR (Normally Open): Trigger will be activated when the circuit closes. As long as the circuit
remains closed, the triggered program will play in a loop. When the circuit opens, the program
will keep playing until it ends and then it will stop. With only a short pulse, the program will play
just once.
●
NC_TR (Normally Closed): Trigger will be activated when the circuit opens. As long as the circuit
remains open, the triggered program will play in a loop. When the circuit closes, the program will
keep playing until it ends and then it will stop. With only a short pulse, the program will play just
once.
●
TOGGLE_TR: It works with NO and NC circuits (external triggers). The first pulse starts the triggered
program to play in a loop. After the second pulse, the program will stop. Another pulse will
restart the program.
●
AUTO_TR: The trigger will be activated immediately. Upon every start-up, the device will always
search for any triggers set to this mode and will activate them.
02)
Press the ENTER button to confirm your choice.
Note:
It is possible to use each of the 4 modes at the same time, independently, for separate triggers (1-6).
Delay
In this submenu you can set the delay time.
01)
Press the UP/DOWN buttons to set the delay time. The adjustment range is 0–120 seconds.
02)
Press the ENTER button to save changes.
