SHOWTEC Star Force, Руководство по эксплуатации продукта

Страница: 14 / 19

12
1. Auto Run Programs
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Auto Mode of the Star Force.
3) Press Setup to enter the AUTO Menu. You can choose 2 different sub menus .
Speed from 01-99 and FL
Flash Frequency from 00-99
4) Use the SETUP button to scroll through the menu.
2. DMX Mode
When a DMX signal is present, the d will blink.
With this menu you can set the DMX address.
1) Press the MODE button on the device, until the display shows .
2) You can choose 512 different DMX addresses.
Use the
Up / Down buttons to select the required address from .
3) You can also press the SETUP button to set the DMX Mode.
4 Channels
3. Slave Mode
When the display shows: , the device is a slave device. It will now react the same as its master.
4. Sound control Mode
1) Press the MODE button on the device, until the display shows . Turn on the music and the
Star Force will react to the beat of the music.
You cannot adjust the sensitivity.
5. LED Display Mode
With this menu you can set the LED Display On or Off.
1) Press the MODE button on the device, until the display shows .
2) Press Setup to enter the LED Display Menu. You can choose 2 different settings.
3) Use the Up / Down buttons to select:
ON: The LED display will light all the time.
OFF: The LED display will turn off after 30 seconds.
6. Display Reverse
With this menu you can reverse the LED Display.
1) Press the MODE button on the device, until the display shows .
2) Press Setup to enter the Display Reverse Menu and change the display to upside-down.
LED display regular.
LED display upside-down.
7. Version Number
With this menu you can view the version number of your Star Force.
1) Press the MODE button on the device, until the display shows .
2) Press Setup to show the version number.
Version V1.0