SHOWTEC Spectral CYC650, Руководство пользователя

Страница: 18 / 31

16
6. Changing the Settings
1) Enter UPLD to upload the custom programs from the current MASTER device to all SLAVE devices.
In order to activate the upload function the password must be entered.
Password : UP > DOWN > UP > DOWN. Then press ENTER to confirm your password
When uploading the MASTER and SLAVE units will light up YELLOW.
If an error occurs when uploading the MASTER and/or SLAVE devices will light up RED.
When uploading one of the custom programs has been successful, the MASTER and SLAVE devices
will light up GREEN
2) In order to reset the custom modes to its default values select REST.
3) Enter DIM Mode to select a certain dimmer mode and dimmer speed .
When DIMMER is set to OFF, then RGBW and the MASTER DIMMER are linear.
Dim 1/2/3/4 are speed modes of the non linear dimmer. DIM1 is fastest, and DIM4 is slowest.
The DIM
setting does not have any effect in TOUR mode. The DMX setting overrules the DIM setting.
4) The Color settings menu enables you to activate/deactivate the color calibration functions .
When you have selected RGBW to ON, RGB TO WHITE has been set.
This means RGB = 255, 255, 255. The color is displayed as you have calibrated the specific color in
menu
CALIBRATION2

RGBW .
When it is set to NO , on RGB = 255,255,255, the RGB values are not adjusted and the output is most
powerful. The RGB ’ s parameter can be adjusted in CALIBRATION2 .
5) When UC is selected, the RGB output is adjusted to a standard preset universal color. This way,
different versions of Spectral CYC650’s are color balanced to match each other.
7. FACTORY DEFAULT SETTINGS
1 STATIC = 000
2 DMX Address = 001
3 Run Mode = DMX
4 Personality = TOUR
5 DIMMER = DIM4
6 COLOR = OFF
7 EDIT = 000
8 FAN = AUTO
9 KEYLOCK = OFF