SHOWTEC Spectral 300 Q4, Руководство по эксплуатации продукта

Страница: 19 / 25

17
3) Press: UP + DOWN +UP + DOWN ! and then press the MENU button to go to the next menu.
4) Enter the menu to select the white colors of a certain color temperature.
There are 11 pre-programmed White colors that can be edited by using RED, GREEN, BLUE and WHITE.
You can adjust the RGBW parameters to make different white colors.
When the new setting is activated, it is possible that the color is not full RGB.
If you have set a lower value for R, G or B (255, 255, 255), the entire output is also lower.
When you choose RGB= 255, 255, 255 on your DMX controller, the white color shown to you, will be
the one you manually made in the Calibration Menu (
CAL  RGB ).
5) To exit this menu press the UP/Down buttons go to and then press the MENU button.
DMX Channels
9 Channels (Tour)
Channel 1 – Master Dimmer
0-255 Brightness from 0 to 100%
Channel 2 – Red
0-255 Red gradual color brightness from 0 to 100%
Channel 3 – Green
0-255 Green gradual color brightness from 0 to 100%
Channel 4 – Blue
0-255 Blue gradual color brightness from 0 to 100%
Channel 5 – White
0-255 White gradual color brightness from 0 to 100%
Channel 6 – Macro Colors
000 – 010 No Function
011 – 030 Red 100% / Green Up / Blue 0%
031 – 050 Red Down / Green 100% / Blue 0%
051 – 070 Red 0% / Green 100% / Blue Up
071 – 090 Red 0% / Green Down / Blue 100%
091 – 110 Red Up / Green 0% / Blue 100%
111 – 130 Red 100% / Green 0% / Blue Down
131 – 150 Red 100% / Green Up / Blue Up
151 – 170 Red Down / Green Down / Blue 100%
171 – 200 Red 100% / Green 100% / Blue 100% / White 100%
201 – 205 White 1: 3200K
206 – 210 White 2: 3400K
211 – 215 White 3: 4200K
216 – 220 White 4: 4900K
221 – 225 White 5: 5600K
226 – 230 White 6: 5900K
231 – 235 White 7: 6500K
236 – 240 White 8: 7200K
241 – 245 White 9: 8000K
246 – 250 White 10: 8500K
251 – 255 White 11: 10000K