SHOWTEC spectral 260 white, Руководство пользователя

Страница: 12 / 24

11
Ordercode: 43518
Spectral 260 White
Dipswitch setting for DMX mode
DMX products must have their own "address" to receive DMX signals.
Addresses on the controller are set by flipping the appropriate DMX Dip switches #1-#9.
Starting address: DMX channel 1
You need to know that DMX address settings are the sum of the dip switch values.
A standard DMX address for a Spectral, which has 5 channels is as follow:
Example:
Spectral
Address value
DMX Dip Switches “On”
Unit 7 31 #1,#2,#3,#4 and #5
Switch
Value
#1 1
#2 2
#3 4
#4 8
#5 16
Total sum: 31
Explanation: Since each unit has 5 channels, each address advances 5 values (See Address Value
above). Once address values are determined, add DMX dip switch values to obtain the appropriate
address (DMX Dip Switches "ON") for each unit. Flip appropriate DMX dip switches on each unit.
Example:
01) If you want to give a Spectral DMX address 133, you first have to find the number 133 in the DMX
Chart. (See page 13)
02) Then look at the left side (Dip Switches #1-#5) horizontally from 133.
In the Table you’ll see #1=ON, #2=OFF, #3=ON, #4=OFF, #5=OFF.
03) Finally look at the upper side of the table (Dip Switches #6-#9) vertically from 133.
In the Table you’ll see #6=OFF, #7=OFF, #8=ON, #9=OFF.