SHOWTEC Single WDP-1, Руководство пользователя

Страница: 10 / 16

Ordercode: 50756
Single WDP-1
Main Menu Options
1. Remote control/Manual control
2. DMX Addressing (Fun1)
3. Dimmer/Switch (Fun1)
4. Dimmer Limit (Fun1)
5. WDP Control (Fun1)
6. Dimmer Preset (Fun2)
7. Full On (Fun2)
1. Remote Control/Manual Control
01)
Press the MENU button until the display shows or .
02) Press the UP/DOWN buttons to choose between (DMX/wireless DMX receiver enabled) and
(manual mode).
Note: If you have chosen
, please read sections 2-5.
If you have chosen , please read sections 6-7.
2. DMX Addressing (Fun1)
01)
Press the MENU button until the display shows .
02) Press the UP/DOWN buttons to choose the desired DMX address.
The adjustment range is between 001-512. Press and hold down the UP/DOWN buttons for fast DMX
address selection.
03) The currently selected DMX address will be automatically saved.
3. Dimmer/Switch (Fun1)
01)
Press the MENU button until the display shows .
02) Press the UP/DOWN buttons to choose between and .
03) If set to , then it is possible to remotely dim the light output.
04) If set to , then it is possible to switch the light output on/off.
4. Dimmer Limit (Fun1)
01)
Press the MENU button until the display shows .
02) Press the UP/DOWN buttons to set the desired maximum dimming limit value. The adjustment range is
between 0-100.
5. WDP Control (Fun1)
01)
Press the MENU button until the display shows .
02) Press the UP/DOWN buttons to choose between (controlled by XLR DMX) and
(controlled by wireless DMX).
6. Dimmer Preset (Fun2)
01)
Once you have set the device to (see section 1 above), press the MENU button.
02) The display will show .
03) Press the UP/DOWN buttons to set the desired dimmer value. The adjustment range is between 0-100,
from dark to brightest.
9