SHOWTEC POWER SPOT 9 G6 TOUR V1, Руководство пользователя

Страница: 18 / 28

17
Ordercode: 42576
Power Spot 9 Q6 Tour
7. Built-in programs
With this menu you can you can set the built-in programs.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open this menu.
03) You can use the UP/DOWN buttons to scroll through the 12 built-in programs.
04) You can use the SETUP button to open menu .
05) Use the UP/DOWN buttons to choose a color setting.
06) You can use the SETUP button to change the flash frequency of every color from .
This does not apply for the color setting .
07) When you select , you can press the UP/DOWN buttons to switch between the
built-in programs.
08) You can choose 2 different sub menus.
Speed from 000-100.
Flash Frequency from 000-099.
09) Use the SETUP button to open one of these menus or to switch between both menus.
10) Use the UP/DOWN buttons to change the speed from .
11) Use the UP/DOWN buttons to change the flash frequency from .
8. Slave Mode
With this menu you can set the slave mode.
01)
Press the MODE button and then the UP/DOWN buttons, until the display shows .
If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.