8
One Plum Flower LED (
Built-in Programs
)
1.
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2.
When the Plum Flower LED is not connected by a DMX-cable, it functions as a stand-alone device.
This device has 7 built-in programs :
Program 1
: Dipswitch #8 set to ON
Red → Green → Amber → Blue → White
These colors change in sequence. Every single color will light up and each time a color lights up, the
motor will change its direction accordingly.
Program 2
: Dipswitch #9 set to ON
White → Blue → Amber → Green → Red
These colors change in sequence. Every single color will light up and each time a color lights up, the
motor will change its direction accordingly.
Program 3
: Dipswitch #8+9 set to ON
Red → Green → Amber → Blue → White
Every single color will be added to the previous one, until all colors are lit. Each time a color is added, the
motor will change its direction accordingly.
Program 4
: Dipswitch #10 set to ON
White → Blue → Amber → Green → Red
Every single color will be added to the previous one, until all colors are lit. Each time a color is added, the
motor will change its direction accordingly.
Program 5
: Dipswitch #8+10 set to ON
Red → Green → Amber → Blue → White
The device will start with all colors ON. Every single color will be subtracted, until the last color is OFF. Each
time a color is subtracted, the motor will change its direction accordingly.
Program 6
: Dipswitch #9+10 set to ON
Strobe
+ Red → Green → Amber → Blue → White
Every single color will be added to the previous one, until all colors are lit. Each time a color is added, the
motor will change its direction accordingly.
Program 7
: Dipswitch #8+9+10 set to ON
Strobe
+ White → Blue → Amber → Green → Red
Every single color will be added to the previous one, until all colors are lit. Each time a color is added, the
motor will change its direction accordingly.
