SHOWTEC Pixel Square 16 COB, Руководство пользователя

Страница: 10 / 28

9
Ordercode: 41267
Pixel Square 16 COB
Control Modes
There are 6 modes:
Auto mode
Built-in programs
Static colors
Sound-controlled
Master/Slave
DMX-512 (2CH, 3CH, 5CH, 12CH, 24CH, 48CH)
One Pixel Square (Auto mode, Built-in programs and Static colors)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Pixel Square is not connected with a DMX cable, it functions as a stand-alone device.
05) Please see page 13 for more information about Auto mode, Built-in programs and Static colors.
One Pixel Square (Sound-controlled)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Pixel Square is not connected with a DMX cable, it functions as a stand-alone device.
05) Please see page 14 for more information about the Sound-controlled mode.
Multiple Pixel Squares (Master/Slave Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-pin XLR cable to connect the Pixel Squares.
The pins: 01) Earth
02) Signal (-)
03) Signal (+)
05) Link the units as shown in Fig. 03, connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. You can
use the same functions on the master device as described on pages 13-14 (Auto, Built-in programs,
Static colors or Sound-controlled). This means that you can set your desired operation mode on the
master device and all slave devices will react the same as the master device.
Multiple Pixel Squares Master/Slave Set Up
Fig. 03