SHOWTEC Performer 60 LED, Руководство пользователя

Страница: 11 / 24

10
Ordercode: 33100
Performer 60 LED
Control Modes
There are 5 modes:
● Auto mode
● Dimmer mode
● Sound-controlled mode
● Master/Slave
● DMX-512 (1CH, 3CH)
One Performer (Auto mode and Dimmer mode)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Performer is not connected with a DMX cable, it functions as a stand-alone device.
Please see page 15 for more information.
One Performer (Sound-controlled)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Turn on the music. The Performer will react to the beat of the music. Please see page 15 for more
information about the sound-control options.
Multiple Performers (Master/Slave control)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-pin XLR cable to connect the Performer.
The pins: 01) Earth
02) Signal -
03) Signal +
05)
Link the units as shown in fig. 04. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second and third units.
You can use the same functions on the master device as described on page 15. This means that
you can set your desired operation mode on the master device and all slave devices will react the
same as the master device.
Multiple Performers (Master/Slave control)
Fig. 04