SHOWTEC LED Powerbrick Set, Руководство по эксплуатации продукта

Страница: 12 / 17

11
DMX Controlled
1. The device will start test-mode.
2. Press MODE button to enter mode setting.
3. Switch to System Mode, then press the Set Up-button.
4. Enter the amount of tubes you are using.
5. For DMX Controlled you have to use DMX Channel: 1-65535, then press the Set Up-button again.
6. The LCD now shows “Set Address YES”; press SETUP-Button (=NO) to keep your previous settings,
or YES (=Up-Button) to store your choice.
7. Now your unit is DMX-Controlled. You will find all the pre-programmed scenes below.
Channel 1
Channel 2
Channel 3
To select programs via DMX Mode you have to make combinations of CHANNEL 2 and CHANNEL 1.
0-28 Black-out
29-57 Static RED
58-86 Static GREEN
87-115 Static YELLOW
116-144 Static BLUE
145-173 Static PURPLE
174-202 Static CYAN
203-231 Static WHITE
232-255 Color Change
0-12 Slow Flow 1
13-25 Slow Flow 2
26-38 Roll Chase 1
39-51 Roll Chase 2
52-64 Multi Color
65-77 Fast Flow 1
78-90 Fast Flow 2
91-103 2 Color Chase
104-116 2 Color Flow
117-129 Color Fade
130-142 B+W Flow
143-155 R+G Flow
156-168 G+B Flow
169-181 R+B Flow
182-194 R+G Chase
195-207 R+B Chase
208-220 R+W Chase
221-233 B+G Chase
234-246 W+G Chase
247-255 Rainbow Chase
0-255 Strobe Setting Variable from OFF to 20Hz (0-255).
255=ON