SHOWTEC LED Powerbar 12, Руководство пользователя

Страница: 8 / 13

6
DMX Operation
Press the Up/Down button to change the DMX address setting rnenu:
The DMX Channel functions when using the entire device as one:
Channel 1:
Red (0-255)
Channel 2: Green (0-255)
Channel 3: Blue (0-255)
The LED Powerbar’s built-in controller will automatically detect the presence of a DMX signal.
In order to receive a DMX signal, the built-in controller must be attached to a DMX controller by a 3-pin DMX
cable and the DMX controller must be turned on.
To mix RGB color use channels 1, 2, 3.
Note: When there is no DMX signal, the LED Powerbar will switch to Stand-alone Mode after a few
seconds.
DMX Addressing
Unit address DMX address
1 1
2 4
3 7
4 10
5 13
6 16
7 19
8 22
9 25
. .
. .
Etc. .