SHOWTEC LED Pixelboard 500/256, Руководство по эксплуатации продукта

Страница: 8 / 31

6
Overall Requirements
• Windows XP computer with an available PCI slot
• ATI graphics card or Nvdia Geforce with DVI Out
• LED Pixelboard Controller (
101140 ); 1 controller for every 6 panels wide and 16 panels high
Computer System Requirements
Minimum
Operating system: Windows XP SP2 (Service Pack 2)
Processor: Pentium 200 MHz with at least one free PCI slot
Harddisk: 20 GB 5400 RPM
Memory: 128 MB
Graphic Card: ATI Graphics Card with dual display and DVI-I output
Note: NVIDIA graphics cards are not compatible with this software
Recommended
Operating system: Windows XP SP2 (Service Pack 2)
Processor: Pentium 1 GHz or better with at least one free PCI slot
Harddisk: 40 GB 7200 RPM or more
Memory: 512 MB or higher
Graphic Card: ATI Graphics Card with dual display and DVI-I output
Note: NVIDIA graphics cards are not compatible with this software
Tested on an ATI Radeon 9300
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
The LED Pixelboard can be used indoors and outdoors. Due to the IP65 rating, the LED Pixelboard will be
reliable and safe to use in most weather conditions. The LED Pixelboard can be viewed during night-time as
well as day-time. Due to the clever mounting system it is easy to setup. The LED Pixelboard excellent
design allows you to vary the setup in many shapes and sizes.