SHOWTEC Helix S5000 Q4, Руководство пользователя

Страница: 16 / 44

15
Ordercode: 43725
Helix S5000 Q4
Multiple Helixes (DMX Control)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 5-pin XLR cable to connect the Helix and other devices.
05) Link the units as shown in fig. 08. Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units.
06) Supply electric power: Plug electric mains power cords into each unit's PowerCON True1 socket, then
plug the other end of the mains power cord into proper electric power supply sockets, starting with
the first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Helixes (DMX Set Up)
Fig. 08
Note: Link all cables before connecting electric power!