SHOWTEC galactic b300, Руководство пользователя

Страница: 14 / 20

12
Menu Overview
Main Menu Options
1. DMX address
2. Master/Slave
3. Test
4. Automatic
5. Sensitivity
You can only change a certain setting when the display is blinking.
If you can’t change a certain value, please press the
Function -button once and then change the value.
1. DMX Mode
With this menu you can set the DMX address.
1) Press the FUNC button, until the display shows .
2) You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from
.
3) Use the ENTER button to store your setting.
2. Slave Mode
With this menu you are able to set the device as a slave device.
1) Press the FUNC button, until the display shows .
2) Use the ENTER button to store your setting.
3. Run Test
1) Press the FUNC button, until the display shows .
2) When you press ENTER , the device will start an internal test.
4. Built-in Programs Mode / Sound Mode
1) Press the FUNC button, until the display shows . This is the Auto Mode.
2) If you want the Sound Mode, use the Up / Down buttons to select .
3) Use the ENTER button to store your setting.