A
B
C
D
E
Lamp Items
A - Lever
B - "EFR” Lamp
C - Lamp Base
D - Lamp Socket
E - Lamp Pins
Figure 1
Getting Ready
All Showtec products are thoroughly tested at the factory and shipped in
perfect condition. If damage has occurred during shipping or if components
are missing, please contact your Showtec dealer immediately.
Your package should include:
(1 ) One Showtec Firestorm series lighting effect with bracket.
(2) One IEC electric mains power cord with plug.
(3) One product user manual.
The lamp may or may not be included, depending on your Showtec dealer. In
most cases, the lamp is not included.
Install the Lamp (Firestorm Miniscan)
The Firestorm Miniscan use the common 15V 150W EFR reflectorbulb as
manufactured by all popular manufacturers. Use only the appropriate lamp for
your unit. Note that product versions that use other lamps may be offered in
the future. Check your product specification label for information.
Lamp Installation (Firestorm Miniscan)
(1 ) Loosen the screw on the top of the lamp cover as well the two black
screws on the bottom of the lamp cover. Open the case.
(2) Read lamp instructions. Do not touch the lamp bulb glass. (See Figure 1.)
Oil on hands shortens the lamp life. (If you touch the bulb glass, wipe off
the glass with a clean, lint-freetowel and rubbing alcohol.)
(3) Hold the lamp socket with one hand. Insert the lamp pins into the holes in
the lamp socket.
(4) Make sure that the lever is up. Slide the lamp in to the lamp base.
(5) Put on the lamp cover and fasten the screws snugly. lamp out of the lamp
Socket.
2
Ordercode: 30949
2 Channels DMX: - colourwheel
- dimmer
8 c open
Music controllable - Master/Slave - DMX
Lamp: 24V / 250W ELC
