SHOWTEC Fascinator 30918, Руководство по эксплуатации продукта

Страница: 13 / 18

11
Addressing
With this menu you can set the DMX address or address a fixture as a master/slave.
- DMX addressing
1) Press , until the display shows .
2) Press to confirm, the display will show (with actually stored address).
And press and to select the required address , press to confirm.
3) Press
, t
he chosen address is shown on the display.
- Master / slave addressing
1) Press
,
until the display shows or (with actually stored address).
2) If the display shows message (with actually stores address).
Select , the display shows .
Select
,
the display shows “ , (with actually stored address).
If you want to address no master or slave, don’t select .
3) Only one fixture can be the master.
When operating the Fascinator, you can identify the master fixture from the slave fixture easily.
The master device has no cable to the DMX input plug.
Note : Disconnect the fixture from the DMX controller before master/slave operating, otherwise data
collisions can occur and the fixtures will not work properly!