SHOWTEC Fademaster 16, Руководство пользователя

Страница: 10 / 13

8
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Programming
1) Press PROGRAM and then press SCENE 1
、
5
、
6
、
8.
2) Use the fader and PAGE button to set the DMX value
，
3) Hold the PROGRAM button and choose the position for the SCENE to save
4) Save the current scene in the current SCENE.
Exit programming
:
1) To exit Program mode, first press the PROGRAM button and then the BLACKOUT button.
Chase / Manual
1) Press MODE
，
you can select 2 different modes: AUTO and MANUAL.
2) You can control the controller manually or automatically.
Chase Mode
A chase is created by using previously created scenes. Scenes become steps in a chase.
1) In Chase Mode the scenes will automatically be played one after the other.
2) In AUTO mode: fader 13 controls the running direction of the CHASE
fader 14 controls the dimmer of the chase
（
0-100%
）
fader 15 control the run speed of the chase CHASE (0.1s-10m)
fader 16 control FADE of the chase
（
0-100%
）
3) In MANUAL mode: fader 1-16 and the PAGE button control the output of each channel.
Blackout
1) Press the BLACKOUT button to enable or disable relevant DMX output. When its LED is lit, that means
the relevant DMX output is disabled. Press this button again the LED will be “off”, that means the DMX
output is reactivated.