SHOWTEC Expression 8000, Руководство пользователя

Страница: 11 / 40

10
Ordercode: 41391
Expression 8000 Spot
Control Modes
There are 4 modes:
• Auto
• Manual
• Master/Slave
• DMX-512 (17CH, 23CH)
One Expression (Auto and Manual)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) When the Expression is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 15 and 19 for more information about the Auto mode and Manual mode.
Multiple Expressions (Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Use a 3-pin/5-pin XLR cable to connect the Expression.
The pins: 01) Earth
02) Signal -
03) Signal +
03)
Link the units as shown in fig. 03. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on pages 15 and 19 (Auto or
Manual). This means that you can set your desired operation mode on the master device and all
slave devices will react the same as the master device.
Multiple Expressions (Master/Slave control)
Fig. 03