SHOWTEC EVENTLITE 6/3, Руководство пользователя

Страница: 15 / 28

14
Ordercode: 44000
EventLITE 6/3 WDMX
Multiple EventLITE 6/3 WDMX DMX Set Up
Fig. 07
Note: Link all cables before connecting electric power!
Multiple EventLITE 6/3 WDMX (Slave Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the EventLITE 6/3 WDMX.
The pins: 1. Earth
2. Signal (-)
3. Signal (+)
05) Link the units as shown ( Fig. 08 )to the second unit's "in" socket. Repeat this process to link the second,
third, and fourth units. You can use the same functions on the master device as described on page
19 (Manual Control or Music control). This means that all slave devices will react the same as the
master device.