background image

9. ONLINE OPERATION

Operation Guide

12

Press PAGE button and SHOW button simultaneously and hold on for about
10s, all the shows and scenes created by users will be deleted. The SHOW
and SCENE resume the default setting. Each SHOW button has 5s' built-in
show.

10. DEFAULT SETTING

*Note:

If there is no operation in 30s, the brightness of LED indicators will decrease.

In the state of online, the Timer function of linked DA-U-48s is not available.
The Timer function is engaged in five minutes if users exit online state, or
repower the unit.

*Note:

The maximum number of online units is 32.

To operate Timer function in the state of online, users need to connect an
additional Timer panel.

If you want to connect multiple DA-U-48s,or to connect one or multiple
triggering panels, you are required to connect all the DMX IN ports in parallel.
In the state without external DMX input, the online function is available. At this
time, pressing any key of Scene, Show, Preset and Power on any online unit
will trigger the same keys simultaneously on all the online units.

2.1 Playing a Scene

Press the corresponding button of S1~S8 may raise the scene which has been stored
in it, including the controlling data of Curtain and Amplifier. The LED indicators inside
the touch toggle show the fadetime of the current scene.

2.2 Editing a Scene

In the state without DMX input, the user may use the Page button and the channel
button 1~8 to select the desired channel.

The user may use the Page button and the channel button 1~8 to select the desired
channel. The desired channel can be counted by an expressions as following:

The desired channel=Channel(N) + (PAGE-1) x 8

To choose the channel you prefer to edit, the LEDs inside touch toggle display its
DMX value. Rotating the touch toggle clockwise or anti-clockwise may change the
DMX value of the current channel. Likewise, to repeat the above process to change
the other channels' DMX value.

Note:

Press the PAGE button and hold it on, simultaneously rotate the touch toggle may
increase or decrease the DMX value for all the channels.

In the state with DMX input, all 48 channels' DMX value hinges on the external
DMX, the DA-U-48 cannot change it.

Saving a Scene

2.3

After the current Edit Scene is complete, press any one of the button S1~S8 for 2
seconds, the current scene is stored to the appointed button, including the 64 channels.

Operation Guide

5

2. SCENE

Press FADE button, then rotate the touch toggle to adjust the fadetime in
0-24s-1min-24min.

Содержание Domotion DA-U-48











Отзывы: