SHOWTEC DMX Tester Скачать руководство пользователя страница 1

 

  1 Product Description 

                                                                                                                                                                     

 

   

 

This is a 

Professional DMX Tester

 with many useful functions. There are 8 main function modes 

provided for user’s application: DMX packet test, DMX data—RX, DMX data—TX, Moving light, Save 
Cue (Scene), Cable test, MIDI data—RX and System setup. The unit also offers built-in chargeable 
batteries for user’s convenient operation. To optimize the performance of this product, please read this 
Manual carefully to familiarize yourself with the basic operations.     

  2

 

Notice Information 

                                                                                                                                                                               

 

When unpacking,

 please check the unit is not damaged. If something wrong has happened to 

this product, contact the local dealer immediately. 

 

 

All rights reserved. 

No part of this manual included with this product can be reproduced or

 

transmitted in any form, by any means or for any purpose, without authorized permission.

 

 
             

Warning

 

• 

  Keep the unit dry, do not expose it to water or high levels of humid. 

• 

  Do not open this unit, there is no user serviceable part inside. 

• 

  Turn off the power if not using this unit for a long time. 

• 

  Any strong shocks or vibration may result in malfunction. 

• 

  Do not attempt to dismantle or modify the unit. 

• 

  This unit must only be operated by adults, do not allow children to play with it. 

 
 
 
 
 
 
       

 

 

 

  3

 

Product View                                                                

   

1. LCD Display:    To display relevant menus, settings or function modes. 
2. Multi-Selector:

 

To select desired menus, function modes or used to finish relevant settings. 

3. Power Input: 

 

To input main power via this port.   

4. DMX IN:      3-pin

 

& 5-pin male XLR sockets.   

5. DMX OUT:    3-pin

 

& 5-pin female XLR sockets.     

6. MIDI IN:            MIDI signal can be input via this male socket.   

 

  

24-004-1247 Rev 1.0 

Содержание DMX Tester















Отзывы: