15
4 TEST CHANNELS?
4 TEST CHANNELS?
41 CH [A]
5 SET INPUTS?
51 [DMX ONLY]
5 SET INPUTS?
5 SET INPUTS?
STORED OK
6 UNIT SETUP?
61 [SLAVE]
6 UNIT SETUP?
6 UNIT SETUP?
STORED OK
7 SET TEXT?
W
ELCOME [W]
7 SET TEXT?
4. TEST CHANNELS ?
1.
Tap the UP/DOWN buttons to scroll to "4 TEST CHANLS?"
2.
Press YES, the LCD shows
You may select all or channel 1-6 using the UP/DOWN buttons,
default=A(all channels).
3.
Press YES once, the appropriate channel(s) will be fully on;
P
ress YES twice, the appropriate channel(s) will be half on;
P
ress YES three times, the appropriate channel(s) will go out.
5. SET INPUTS ?
1.
Tap the UP/DOWN buttons to scroll to "5 SET INPUTS?"
2.
Press YES, the LCD shows
You may select DMX ONLY/ MAP ONLY using the UP/DOWN buttons,
default=DMX ONLY.
3.
Press YES to store your setting, the LCD shows
6. UNIT SETUP ?
1.
Tap the UP/DOWN buttons to scroll to "6 UNIT SETUP?"
2.
Press YES, the LCD shows
You may select MASTER/ SLAVE using the UP/DOWN buttons,
default=SLAVE.
3.
Press YES to store your setting, the LCD shows
7. SET TEXT ?
1.
Tap the UP/DOWN buttons to scroll to "7 SET TEXT?"
2.
Press YES, the LCD shows
You may change the blinking character using the UP/DOWN buttons followed
by YES. When you've finished the new text, tap the UP/DOWN buttons
until [END] appears, press YES to store the new text. If you press YES without [END], the new text won't
be stored into memory. If you want to clear all these characters, tap UP/DOWN until [CLR] appears,
press YES, the text will be cleared.