SHOWTEC Digital Flex Strip RGB, Руководство пользователя

Страница: 8 / 16

7
Ordercode: 42773
Digital Flex Strip RGB
Installation
Remove all packing materials from the Digital Flex Strip RGB. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Fig. 02
01)
For best heat dissipation, mount the LED strip on an aluminum or metal surface.
02) Connect the RGB controller to the LED strip.
03) Connect the power adapter to the RGB controller.
04) Plug the power adapter into the power supply.