SHOWTEC Data Flash Strobe, Руководство пользователя

Страница: 18 / 28

Ordercode: 40296
Data Flash Strobe
05) In menu you can select one of the 4 dimming curves, by pressing the UP/DOWN buttons.
06)
With the menu , you can set the dimmer speed, by pressing the UP/DOWN buttons. You can
choose Smooth or Fast.
07) In the menu you can set how long the display will remain ON, when no button is pressed.
08) Press the UP/DOWN buttons to choose between 10, 20, 30 or 60 seconds. If you choose the option
“ON”, the display will remain continuously ON, when no button is pressed.
09) The last option is for resetting the device to the factory settings.
10) Press the SETUP button to open the menu and then press the UP/DOWN buttons to choose Yes or No.
11) Press the SETUP button again to confirm your choice. If you have chosen Yes, the factory settings will
be restored.
12) In the menu you can set the device’s behavior in case of a DMX signal error.
13) Press the SETUP button to open the menu and then press the UP/DOWN buttons to choose Off or
Hold. If you have chosen Off, the device will black out. If you have chosen Hold, the device will use
the last properly received DMX signal until DMX connection is restored.
14) Press the SETUP button to confirm your choice.
15) In the menu you can set synchronous DMX.
16) Press the SETUP button to open the menu and then press the UP/DOWN buttons to choose On or Off.
17) Press the SETUP button to confirm your choice.
17