SHOWTEC Creator 1024, Руководство пользователя

Страница: 21 / 25

20
Creator 1024
Ordercode: 50730
9 Chase
A sequence of one or more pre recorded steps programmed using the CHASE button. It can be replayed
automatically if desired. Sometimes known as SEQUENCE, STACK or Linked Cues. The chase can include
600 steps in this console.
9.1 Create
1)
Press <Chase>. In the Playback area, the LED indicators of the <Swop> buttons without any scene
stored will keep flashing; those with a chase will keep always on; and, those with a scene will be off;
2) Press a desired <Chase> button to enter the chase menu. At this time, the LCD will show the current
page number and the total step number of the multi-step scene; Press <Up> or <Down> to turn the
pages;
3) After editing the stage effects, press <C> [Record] to enter the record menu;
4) Press <B>/<C> to select the storage mode;
5) If it comes to the last step, then, press <D>[Record Ad Final Step] to store directly, or, press an off
<Swop> button to store in it. To insert or overwrite a step, select a desired position, then, press <B> to
overwrite or press <C> to insert a step before the selected one.
9.2 Delete a step
Under the Chase menu, press <Delete> to enter the Delete menu; press a desired <Swop> button to
delete a step.
9.3 Step time
Under the Chase menu, press <Time> then press a desired <Swop> button to enter the Time Editing menu.
Press <Up> or <Down> to turn the pages; press a soft key to select the options for editing; roll <Wheel
Value> to change the values; Press <Enter> to confirm.
The time options include (see the figure on the next page):
[
Wait Fade In ] – The wait time before an HTP channel fading in
[ Wait Fade Out ] –The wait time before an HTP channel fading out
[ Fade In ] –The fade in time of an HTP channel
[ Fade Out ] – The fade out time of an HTP channel
[ LTP Slope ] – The fading time of an LTP channel
[ LTP Wait ] – The wait time before an LTP channel fading
[ Connect ] – If close the connection, then, the scene running will be paused at this step until <Go+> or
<Go-> is pressed.
[
Simple Step ] – The global time of using multi-step scene
[ Complex Step ] – The special time for its own
9.4 Include steps
Under the Chase editing menu, press a desired <Swop> button of the step, then, scene data will be
imported.
9.5 Global Time
1)
Under the first level menu, press <Time>;
2) Then, press a desired scene. Press <Up> or <Down> to turn the pages; press a soft key to select the
options for editing; roll <Wheel Value> to change the values; Press <Enter> to confirm.
9.6 Delete a scene
1)
Under the first level menu, press <Delete>;
2) Press a desired <Swop> button twice to delete.