SHOWTEC Colour star sky I DMX, Руководство пользователя

Страница: 5 / 11

3
•
Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord
from time to time.
•
Make sure that the cable diameter of the extension cords and powercables are sufficient for the
current consumption of the device.
•
The powercable may not be modified, broken, mechanically strained, pressed together or heated.
•
The cable insert or the female part in the device must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly
electrical shocks.
•
If the external cable is damaged, it has to be replaced by a qualified technician.
•
If the Star Sky 2 is obviously damaged, it has to be replaced. So that its functions are not impaired.
•
Never hit the lighting cloth with a hammer or other tools, as this may lead to damaged LEDs.
•
Never operate the device in the packaging or wrapped in order to avoid heating-up.
•
This lighting cloth can be electrically connected with another cloth.
•
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
•
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
•
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
•
For adult use only. Lighteffect must be installed out of the reach of children. Never leave the unit
running unattended.
•
Allow time to cool down, before storing the cloth in the bag.
•
The user is responsible for correct positioning and operating of the Star Sky 2. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.
•
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
•
During the initial start-up some smell may arise. This is a normal process and does not necessarily
mean that the device is defective.
•
Repairs, servicing and electric connection must be carried out by a qualified technician.
•
For replacement use and fuses of same type and rating only.
•
WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
This device is not designed for permanent operation. Consistent operation breaks will ensure that the device
will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 1 meter.
The maximum ambient temperature t
a
= 45°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the
warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !