12
Order code: 50703
ColorCue 1
04)
Set the desired color by using one of the following 3 options:
●
Manual setup: follow the steps under Manual Mode (see page 8) to set up the color manually
●
Preset color: follow the steps under 2.1. Preset Colors Mode (see page 9) to select one of the 12
preset colors
●
User color: follow the steps under 2.2. User Colors Mode (see page 9) to select one of the user
recorded colors.
05)
Press the RECORD button (21) to save the setting. The LEDs on all buttons will blink 3 times.
06)
Repeat steps 4-5 above to program all steps in a chase.
Note: One chase can have up to 99 steps.
07)
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button will turn off.
Note: Strobe, speed, fade and direction of the chase cannot be recorded in a chase. These functions
can be adjusted during the playback of a chase.
Add a Chase Step to an Existing Chase
01)
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button will start blinking.
02)
Press the USER CHASES button (16) to enter User Chases Mode. The LED on the button will light up.
03)
Press the CHASES button (01) – (12) for which you want to edit the chase. The LED on the button will
light up.
04)
Press the STEP+ (19) or the STEP- (20) button to select the step after which you want to add another
step.
05)
Set the desired color by using one of the following 3 options:
●
Manual setup: follow the steps under Manual Mode (see page 8) to set up the color manually
●
Preset color: follow the steps under 2.1. Preset Colors Mode (see page 9) to select one of the 12
preset colors
●
User color: follow the steps under 2.2. User Colors Mode (see page 9) to select one of the user
recorded colors.
06)
Press the RECORD button (21) to save the setting. The LEDs on all buttons will blink 3 times.
07)
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button will turn off.
Delete a Chase Step
01)
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button will start blinking.
02)
Press the USER CHASES button (16) to enter User Chases Mode. The LED on the button will light up.
03)
Press the CHASES button (01) – (12) which you want to edit. The LED on the button will light up.
04)
Press the STEP+ (19) or the STEP- (20) button to select the step which you want to delete.
05)
Press the DELETE button (22) to delete the step.
06)
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button will turn off.
Delete a Chase
01)
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button will start blinking.
02)
Press the USER CHASES button (16) to enter User Chases Mode. The LED on the button will light up.
03)
Press the CHASES button (01) – (12) which you want to edit. The LED on the button will light up.
04)
Press the DELETE button (22) and the CHASES buttons (01) – (12) simultaneously to delete the chase.
The LEDs on all buttons will blink 3 times.
05)
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button will turn off.
Содержание ColorCue 1
Страница 16: ...2019 Showtec...
