SHOWTEC Club Par Dizzy 3/8, Руководство пользователя

Страница: 18 / 28

17
Ordercode: 42653
Club Par Dizzy 3/8
6. System Settings
01)
Press the UP and DOWN buttons until the display shows .
02) Press the ENTER button to enter the menu.
03) Repeatedly press the UP and DOWN buttons to toggle between the following system settings:
Display power saving mode
Display Reverse mode
Ir Remote contol
DMX Fail
Sound Mode
Reset
04) While the display shows , press the ENTER button to proceed to the Display settings.
05) Press the UP and DOWN buttons to choose between .
If set to ON, the display will remain ON.
If set to OFF, the display will dim after 30 seconds.
06) While the display shows , press the ENTER button to proceed to the Display Reverse.
07) Press the UP and DOWN buttons to choose between .
If set to ON, the display will reverse.
If set to OFF, the display will remain normal.
08) While the display shows , press the ENTER button to proceed to the Infrared Remote Control.
09) Press the UP and DOWN buttons to choose between .
If set to ON, the fixture will recognize the included remote control.
If set to OFF, the remote control will be ignored by the fixture.
10) While the display shows , press the ENTER button to proceed to the Blackout/DMX Fail Mode.
11) Press the UP and DOWN buttons to choose between .
If the device has been set to and the DMX signal is lost, the device will not blackout, it will
automatically start its auto program.
If the device has been set to
Yes and the DMX signal is lost, the device will blackout. The
device will not remember its last received DMX signal. Do not use this option when the device is used
as a stand-alone device (i.e. without a DMX signal and without an XLR cable). The moving head will
remain in a blackout state, no matter what setting you have set in one of the stand-alone modes.
12) While the display shows , press the ENTER button to proceed to the Sound Mode.
13) Press the UP and DOWN buttons to choose between .
If the device has been set to On, the device will react to the beat of the music.
If the device has been set to the device will not react to the beat of the music.
14) While the display shows , press the ENTER button to proceed to the power saving mode.
15) Press the UP and DOWN buttons to choose between .
If the device has been set to On, the device will not reset.
If the device has been set to the device will reset the device’s settings.