SHOWTEC 51363, Руководство пользователя

Страница: 19 / 32

18
Solaris 5.5 incl. FB4
Product code: 51363
Angle Adjustment
You can adjust the angle of the device with the adjustment screws (04).
03) Turn the adjustment screws (04) counterclockwise to release them.
Tilt the device at the desired angle (see Fig. 11).
Turn the adjustment screws (04) clockwise to tighten them. Make sure that the device cannot move
freely after the adjustment screws (04) are tightened.
Fig. 11
Connecting to Power Supply
DANGER
Electric shock caused by short-circuit
The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other
voltage or frequency to the device.
This device falls under IEC protection class I. Make sure that the device is always electrically connected
to the ground (earth).
Before connecting the device to the socket-outlet:
●
Make sure that the power supply matches the input voltage specified on the information label on
the device.
● Make sure that the socket-outlet has ground (earth) connection.
Connect the device to the socket-outlet with the power plug. Do not connect the device to a dimmer
circuit, as this may damage the device.
Make sure that the socket-outlet is easily accessible.