SHOWTEC 50789, Руководство пользователя, Страница: 11 / 32

10
Booster Pro
Product code: 50789
4. Installation
Safety Instructions for Installation
Attention
Make sure there is enough space for ventilation around the device.
● Do not block the ventilation openings. Without proper heat dissipation and air circulation, the
internal components may overheat. This can result in product damage.
● Do not install near equipment that produces heat, for example amplifiers.
Installation Site Requirements
● The device must be installed only indoors.
● The device can be placed on a flat surface or mounted in a standard 19-inch rack.
● The maximum ambient temperature t
a
= 55 °C must never be exceeded.
● The relative humidity must not exceed 50 % with an ambient temperature of 50 °C.
Rack Mounting
The device can be mounted in a standard 19-inch rack. The device requires 1 rack unit (RU) of space,
which is 44,45 mm high.
Make sure that the rack is sufficiently secured to prevent it from becoming unstable or falling over.
To mount the device in a two-post rack, follow the steps below:
01) Insert 4 cage nuts in the openings on the rack posts where you want to mount the device.
02) Position the device in front of the rack posts so that the 4 mounting openings (01) on the flanges face
the openings on the rack posts with cage nuts.
03) Using a screwdriver, mount the device to the rack posts with 4 screws.
Connecting to Power Supply
DANGER
Electric shock caused by short-circuit
The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other
voltage or frequency to the device.
This device falls under IEC protection class I. Make sure that the device is always electrically connected
to the ground (earth).
Before connecting the device to the socket-outlet:
●
Make sure that the power supply matches the input voltage specified on the information label on
the device.
● Make sure that the socket-outlet has ground (earth) connection.
Connect the device to the socket-outlet with the power plug.