SHOWTEC 50705, Руководство пользователя

Страница: 11 / 24

10
Order code: 50705
ColorCue 3
In single mode the FIXTURES buttons and faders (01)–(24) control the connected up to 24 fixtures. In this
mode BANK A master fader and flash button (K) act as master fader and flash button for all connected
fixtures, and BANK B master fader and flash button (L) have no function.
Operating Functions
Color Selection Mode vs. Parameter Selection Mode
The controls (E)–(I) have double function. Press the MANUAL button (31) to toggle between the two
functions.
Color selection mode
You can adjust the intensity of the colors (red, green, blue, white, amber and UV) of the connected
fixtures. When the LED on the MANUAL button (31) is ON, the color selection mode is enabled and you
can adjust the colors with the controls (E)–(J).
In color selection mode you will first need to fetch the last output value of the respective color. Turn the
controls (E)–(J) clockwise or counterclockwise to fetch the value and return to zero. The display will show
000 for each color.
Parameter selection mode
You can adjust direction, speed, and fade in a chase. You can also adjust the sound sensitivity and add
strobe effect to a chase/scene. When the LED on the MANUAL button (31) is OFF, the parameter
selection mode is enabled and you can adjust the parameters with the controls (E)–(I).
Notes:
● Enabling one mode automatically disables the other mode.
● The UV control (J) does not have a double function. It functions only in color selection mode.
Strobe
You can add strobe effect at any time during playback of a scene or a chase.
01)
Make sure the parameter selection mode is enabled.
02) Turn the STROBE control (I) to add strobe effect. The adjustment range is from OFF to FULL, from low
to high frequency.
Note: The strobe effect cannot be recorded in a scene or a chase.
Blackout
You can activate the blackout function at any time during playback of a scene or a chase.
Press the BLACKOUT (B/O) button (43) to black out the light output of all fixtures. The LED on the button
will start blinking.
Flash
You can activate the flash function at any time during playback of a scene or a chase.
Press one of the master flash buttons (K)/(L) or any of the FIXTURES flash buttons (01)–(24) to activate the
flash function. The LED on the button will light up. The light intensity of the selected fixture(s) will go to
100 %. When you release the button, the light intensity will return to the value selected with the fader.
Hold
You can activate the hold function at any time during manual control or during playback of a scene or
a chase.
Press the HOLD button (41) to hold the current scene. The LED on the button will light up. In playback
mode HOLD will be displayed on the screen. In manual mode, if the hold function is activated, you can
make changes to the color and light intensity of the connected fixtures without outputting the
changes live.