11
Programming
A program (bank) is a sequence of different scenes (or steps) that will be called up one after another.
In the SM-8/2 30 programs can be created of 8 scenes in each.
ENTERING PROGRAM MODE
Press the
PROGRAM
button for 3 seconds until an LED dot next to the label
PROG
blinks. This indicates that
the user is in programming mode.
CREATE A SCENE
A scene is a static lighting state. Scenes are stored in banks. There are 30 bank memories on the
controller and each bank can hold 8 scene memories. The SM-8/2 can save 240 scenes total.
1)
Press and hold the
PROGRAM
button for 3 seconds.
2)
Select a
SCANNER
(fixture)
to program.
3)
Compose a look by moving the
FADERS
. (Changes in fixture attribute such as colors and gobos.)
Press
PAGE SELECT
to access Channels 9~16 on the faders.
4)
To program another
SCANNER
press the
SCANNER
button you have just finished programming then
select another
SCANNER
button to program.
5)
Repeat steps 2 ~ 4 until you have your look.
6)
Tap
MIDI/ADD
button to prepare to store.
7)
Choose a
BANK
(01~30). Use the Up and Down arrow Bank buttons to change if necessary.
8)
Select a
SCENES
button to store. All LED's will blink 3 times. The display will now display the bank and
scene number that is stored.
9)
Repeat steps 2 ~ 8 to record more scenes. ( Read Important notes on the right ->)
10)
To exit program mode, hold the
PROGRAM
button for 3 seconds. The controller will default to a
BLACKOUT
when exiting the programmer.
EDIT A SCENE
1)
Press the
PROGRAM
button for 3 seconds.
2)
Locate the scene in the program
BANK
. Use
BANK UP/DOWN
to navigate program banks.
3)
Select the
SCENE
in the program
BANK
to edit.
4)
Adjust
FADERS
to change the look.
5)
Press the
MIDI/ADD
button then the
SCENE
button again previously selected for editing.
SCENE COPY
1)
Press the
PROGRAM
button for 3 seconds.
2)
Locate the scene in the program
BANK
. Use
BANK UP/DOWN
to navigate program banks.
3)
Select the
SCENE
in the program
BANK
to copy.
4)
Locate the destination scene in the program
BANK
. Use
BANK UP/DOWN
to navigate program banks.
5)
Press the
MIDI/ADD
button then the new
SCENE
button to copy to.
DELETE SCENE
1)
Locate the scene in the program
BANK
. Use
BANK UP/DOWN
to navigate program banks.
2)
Press and hold the
AUTO/DEL
button while pressing the
SCENE
you want to delete.
DELETE ALL SCENES
1)
Press and hold the
PROGRAM
button and the
BANK
while you turn the controller Off.
BANK COPY
1)
Press the
PROGRAM
button for 3 seconds.
2)
Locate the program
BANK
. Use
BANK UP/DOWN
to navigate program banks.
3)
Press and release the
MIDI/ADD
button.
4)
Locate the destination program
BANK
. Use
BANK UP/DOWN
to navigate program banks.
5)
Press the
MUSIC/BANK-COPY
button to compete copy.
BANK DELETE
1)
Press and hold the
PROGRAM
button for 3 seconds.
2)
Locate the
BANK
to delete. Press the
AUTO/DEL
and
MUSIC/BANK-COPY
at the same time to delete
the Bank.
Содержание 50700
Страница 1: ...SM 8 2 ORDERCODE 50700...
Страница 19: ......
