SHOWTEC 50426, Руководство пользователя, Страница: 10 / 14

8
Menu Overview
Menu Functions
1. DMX Address
You can set the DMX address from , by using the Up/Down buttons. Press the Mode
button to save your settings.
2. Sound-control / Flash Menu
If the display shows , the device is in Sound Switch Mode.
If the display shows , the device is in Sound Fade Mode.
3.
/
Function Dimmer/Switch
If the display shows , the dimmer is in Switch Mode.
If the display shows , the dimmer is in Dim Mode.
4. Lxxx Dimmer mode (Only works in Dim Mode)
Maximum Dimmer output on DMX.
You can adjust the maximum output to the dimmer from .
5. Pxxx Manual Dimmer mode
Minimum output on potentiometer.
When set at 10% and the potentiometer is set to 0, the output will stay at 10%
When set at 100%, the potentiometer will have no effect.
You can adjust the maximum output to the dimmer from .
6.
/
Switchpack Mode, only works in Switch Mode .
If the display shows , the dimmer is Full on.
If the display shows , the dimmer is in Switch Mode and can be controlled by DMX.
7.The function of saving
When you have entered the desired settings, you can save them by pressing the Mode button.
8. Master / Slave
Set the Master device to or .
Set the Slave device to .
Note: The master device send 2 Channels to the Slave device.
9. manual Potentiometer
You can use the potentiometer to manually set a certain value.