SHOWTEC 50405, Руководство пользователя

Страница: 26 / 32

25
Ordercode: 50405
RDM Commander
INFOR button
Press the button to view the information about the connected RDM light effects.
01)
Press the INFOR button to open the menu. The display will show:
02)
Select View Device_info and press the jog wheel to open the menu.
03) The display will show the following information: Protocol version, software version, model ID, footprint,
personality, starting address, sub-device number, senor number, product category.
UPDATE button
Press the button to update the software.
01)
Press the UPDATE button to open the menu. The display will show:
02)
Now you have the following options to choose from:
 Device: Displays the total number of found devices.
 SL PAR 130: The name of the current device.
 Filename: Set the desired update file.
03)
Once you have set everything, select Update and press the jog wheel to carry out the update.
F1/F2 Buttons
Press these buttons to define the RDM parameter functions.
01)
Switch the RMD Commander on by moving the power switch (10) to ON position.
02) Select RDM Tester mode and press the jog wheel to activate it.
03) Select the user-defined RDM parameters (RDM PID ≥0x8000).
04) Select Set and press the jog wheel to proceed.
05) Keep on pressing the Update and F1/F2 buttons simultaneously to define and assign the functions to
the respective buttons.
06) Now it is possible to call up the desired RDM parameters by pressing the F1/F2 buttons.