6
Ordercode: 50058
Quick DMX Rack 1024
Installation
Remove all packing materials from the Quick DMX Rack 1024. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
You are only able to connect the Quick DMX Rack 1024 via the included USB cable (USB-A to USB-B) to
your own computer.
Note: When you do not want to connect the Quick DMX Rack to your computer, but to a mains power
outlet, make sure to also buy the external adapter.
Optional accessory
– Showtec USB Adapter / Charger 1000mA
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Saving DMX Files to the Memory Buttons
01)
Install Quick DMX software:
02)
Download the software via this link:
03)
For further information, download the user manual:
04)
Start Quick DMX software, program and save a desired show (scene/chase/pixel/generator).
