SHOWTEC 44570, Руководство пользователя

Страница: 15 / 48

14
Pixel Bubble 75 Set
Product code: 44570
Rigging
The device can be mounted to a truss or other rigging structure in any orientation. Make sure that all
loads are within the pre-determined limits of the supporting structure.
The device is delivered with 2 mounting brackets.
CAUTION
Restrict the access under the work area during rigging and/or derigging.
To mount the device, follow the steps below:
Install the clamps, as shown in Fig. 06. Make sure that you use clamps suitable for attaching the
device to a truss.
Fig. 04
Attach the device to the supporting structure. Make sure that the device cannot move freely.
Secure the device with a secondary suspension, for example a safety cable. Make sure that the
secondary suspension can hold 10 times the weight of the device. If possible, the secondary
suspension should be attached to a supporting structure independent of the primary suspension. Put
the safety cable through the safety eye (10), as shown in Fig. 04