SHOWTEC 44560, Руководство пользователя

Страница: 26 / 44

25
Pixel Panel 1024
Product code: 44560
6. Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as an indoor Pixel panel matrix. It is not suitable for households
and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Mode
The Pixel Panel supports the following control modes:
●
Stand-alone: Auto operation mode (built-in chases), manual operation
● Master/Slave: Auto operation mode (built-in chases), manual operation
● DMX-512, Art-Net: 8, 3072 channels
● Kling-Net: Pixel mapping
For more information about how to connect the devices, refer to 5. Setup on pages 16–24.
To operate the device manually as a stand-alone device or in a master/slave setup:
Adjust the levels for red, green, blue and strobe in the Manual Control menu. See 6.6.3.6. Manual
Color Mode on page 33 for more information.
To run one of the built-in programs in auto operation mode without a DMX controller:
Select one of the 30 built-in chases in the Auto Control menu. See 6.6.3.5. Auto Program on page 32
for more information.
Set the speed of the built-in chase in the Auto Control menu. See 6.6.3.5. Auto Program on page 32
for more information.
To operate the device with a DMX controller:
01) Set the DMX starting address of the device in the DMX Address menu. See 5.3.5. DMX Addressing on
page 18 and 6.6.1. DMX Address on page 28.
02) Select the DMX channel mode. See 6.6.3. Control Modes on page 30 for more information. See 6.7.
DMX Channels on pages 36–37 for complete overview of all DMX channels.