SHOWTEC 43641, Руководство пользователя

Страница: 25 / 32

24
Spectral Revo UV IP65
Product code: 43641
Settings
In this menu you can adjust the device’s settings. This menu requires a password. The default password is
pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
01) Enter the password.
02) Press the ENTER button to confirm the password and access the menu.
03) Press the UP/DOWN buttons to select one of the following 6 options:
● RESET: See 6.6.5.1. Reset
● DIMMER: Select the dimmer speed. The available options are DIM4, DIM3, DIM2,
DIM1, and OFF
● DMX ERROR: See 6.6.5.2. DMX Error
● PWM RATE: Set the PWM (Pulse Width Modulation) frequency. The available options are
600 Hz, 1200 Hz, 2000 Hz, 4000 Hz, 6000 Hz, and 25000 Hz
● FANS: Set the speed of the cooling fans. The available options are SLOW,
NORMAL, FAST, and AUTO
● MODE SETTING: See 6.6.5.3. Mode Settings
04) Press the ENTER button to confirm the selection.
Reset
In this submenu you can restore the default factory settings of the device. This submenu requires a
password. The default password is pressing the UP/DOWN buttons in the following order: UP, DOWN, UP,
DOWN.
01) Enter the password.
02) Press the ENTER button to confirm the password and start the reset. During reset the display will show:
When the reset is completed, the display will show OK.
03)
Press any button to return to the main menu.
DMX Error
In this submenu you can determine the behavior of the device in case of a DMX failure.
01) Press the UP/DOWN buttons to toggle between the following 2 options:
●
SAVE: The device will use the last properly received DMX signal
● BLACK: The device will black out the light output
02) Press the ENTER button to confirm your choice.