Ordercode: 43539
Spectral ZP-5
8.8. Strobe Settings
With this menu you can choose the desired strobe mode.
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to toggle between the following 2 options:
Classic strobe
Special strobe
04)
If you have chosen
, strobe will be active only if you operate the device in one of the
following DMX channel modes/personalities: TOUR, AR2.S and TR16.
9. Calibration
With this menu, you can adjust the characteristics of the white color or set the RGB calibration.
01)
In the main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04)
Press the UP/DOWN buttons to toggle between the following 3 options:
White settings
RGB calibration
Calibration reset
9.1. White color settings
With this menu you can adjust the temperature of the built-in white color presets.
01)
When the display shows
, press the ENTER button to open the menu.
02)
Press the UP/DOWN buttons to choose one of the 11 white color presets:
.
03)
Once you have chosen the desired preset, press the ENTER button to open the submenu.
04)
Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE and WHITE.
05)
Press the ENTER button to open the desired color’s brightness settings.
06)
Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.
9.2. RGB calibration
With this menu you can adjust the temperature of the white color.
01)
When the display shows
, press the ENTER button to open the menu.
02)
Now you can adjust the intensity of the RGB colors. Press the UP/DOWN buttons to toggle between
RED, GREEN and BLUE.
03)
Press the ENTER button to open the desired color’s brightness settings.
04)
Press the UP/DOWN buttons to increase/decrease the color brightness. The adjustment range of
each color is between 0-255, from dark to brightest.
9.3. Calibration reset
01)
When the display shows
, press the ENTER button to open the menu.
02)
Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
03)
The settings, which you have previously adjusted, will have been reset and the display will show OK.
20
Содержание 43539
Страница 15: ...Ordercode 43539 Spectral ZP 5 Menu Overview 14...
Страница 50: ...Ordercode 43539 Spectral ZP 5 Dimensions 49...
Страница 51: ...Ordercode 43539 Spectral ZP 5 50...
Страница 52: ...2015 Showtec...