SHOWTEC 42685, Руководство пользователя

Страница: 14 / 20

13
Ordercode: 42685
Cameleon Bar 24/1 UV
2. Manual mode
With this menu you can set the device’s dimmer and strobe.
01)
While in the main menu, press and hold down the MODE button for 2 seconds, until the display shows
.
02) Press the MODE button once, to open the menu.
03) Press the UP/DOWN buttons to adjust the dimmer. The adjustment range is between
, from off to full on.
04) Press the MODE button once again, to proceed to the strobe flash frequency settings.
05) Press the UP/DOWN buttons to increase/decrease the strobe flash frequency. The adjustment range
is between , from off to high frequency.
3. DMX-512 mode
With this menu you can adjust the device’s DMX settings.
01)
While in the main menu, press and hold down the MODE button for 2 seconds, until the display shows
.
02) Repeatedly press the MODE button to move the radix point, in order to choose the digit which you
want to edit.
03) Press the UP/DOWN buttons to adjust the values. The adjustment range is between
.
04) Press the MODE button once again to proceed to DMX channel mode menu.
05) Press the UP/DOWN buttons to choose one of the 2 channel modes:
2 channels
5 channels
4. Master/Slave mode
With this menu you can set the device as a slave.
01) While in the main menu, press the MODE button until the display shows .
02) The device is now operating in slave mode. It means that it will react the same as the master device.
5. Reset settings
01) While in the main menu, press and hold down the MODE and UP buttons for 5 seconds.
02) Once the device’s settings have been reset, the display will show .