SHOWTEC 42578, Руководство пользователя

Страница: 17 / 24

16
Ordercode: 42578
Powerspot 10 SW White
Settings
With this menu you can set various options.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open this menu.
03) Use the UP/DOWN buttons to choose between the 2 options.
04) Press the SETUP button to open one of the 2 options.
05) With option you can set the desired LCD backlight time.
06) Choose with the UP/DOWN buttons the desired time or if you choose “ ON ”, the display will
continuously light up.
07) With option you can reset the device to the factory settings.
08) Press the SETUP button to proceed .
09) Press SETUP again to confirm. The fixture will reset and start up in the Auto Run mode.
Info
With this menu you can see various info of the fixture.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open this menu.
03) Use the UP/DOWN buttons to choose between the current software version and the current
temperature.
04) Press the SETUP button to open one of the 2 options.
05) The option is for showing the software version of the fixture.
06) Press the SETUP button and you can see the software version .
07) With the option you can see if the temperature of the fixture is too high or not.
08) Press the SETUP button and the display will show if the fixture has a normal temperature.
09) If the temperature of the fixture is too high (the fixture will give a warning error), you’ll have to switch
off the fixture.