SHOWTEC 42487, Руководство пользователя

Страница: 14 / 24

13
Ordercode: 42512
Medium Studiobeam RGBW 3° Tour
The Medium Studiobeam RGBW 3° Tour can be operated with a controller in control mode or without the
controller in stand-alone mode.
Control Panel
A) LED display
B) MODE button
C) UP button
D) DOWN button
Fig. 06
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address, next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign DMX fixture addresses, which is the first
channel with which the Studiobeam will respond to the controller.
Please note, when you use the controller, the unit has
8 channels.
When using multiple Studiobeams, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Studiobeam should be
1(001) ; the DMX address of the second
Studiobeam should be 1+8=9 (009 ); the DMX address of the third Studiobeam should be 9+8=17 (017) ,
etc. Please, be sure that you do not have any overlapping channels in order to control each
Studiobeam correctly.
If two or more Studiobeams are addressed similarly, they will work similarly.
Controlling:
After having addressed all Studiobeam fixtures, you may now start operating these via your lighting
controller.
Note: After switching on, the Studiobeam will automatically detect whether DMX 512 data is received or
not.
If there is no data received at the DMX-input, the “
LED “ on the control panel will not flash.
If not, the problem may be:
• The XLR cable from the controller is not connected with the input of the Studiobeam.
• The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note:
It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.